Latest IEC International Electrotechnical Commission Info

IEC 80601-2-58:2014-Medical electrical equipment-Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery, IEC 60204-31:2013-Safety of machinery-Electrical equipment of machines-Part 31: Particular safety and EMC requirements for sewing machines, IEC 60034-18-41:2014-Rotating electrical machines-Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters-Qualification and quality control tests, IEC 61084-2-2:2017-Cable trunking systems and cable ducting systems for electrical installations-Part 2-2: Particular requirements-Cable trunking systems and cable ducting systems intended for mounting underfloor, IEC TS 62371:2008-Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V, IEC 60335-2-91:2008-Household and similar electrical appliances-Safety-Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers, IEC 60670-1:2015-Boxes and enclosures for electrical accessories for household and similar fixed electrical installations-Part 1: General requirements, ISO 80601-2-69:2014-Medical electrical equipment Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment, IEC 61143-1:1992+AMD1:1997 CSV-Electrical measuring instruments-X-t recorders-Part 1: Definitions and requirements, IEC 60917-1:2019-Modular order for the development of mechanical structures for electrical and electronic equipment practices-Part 1: Generic standard. Follow this IEC 60335-2-115:2021-Household and similar electrical appliances-Safety-Part 2-115: Particular requirements for skin beauty care appliances for all the advice.



IEC 60364-7-706:2005-Low-voltage electrical installations-Part 7-706: Requirements for special installations or locations-Conducting locations with restricted movement, IEC 60580:2019-Medical electrical equipment-Dose area product meters, IEC 63067:2020-Electrical installations for lighting and beaconing of aerodromes-Connecting devices-General requirements and tests, IEC 61293:2019-Marking of electrical equipment with ratings related to electrical supply-Safety requirements, IEC 60404-3:1992/AMD2:2009-Amendment 2-Magnetic materials-Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester, IEC 60512-2-6:2002-Connectors for electronic equipment-Tests and measurements-Part 2-6: Electrical continuity and contact resistance tests-Test 2f: Housing (shell) electrical continuity, IEC 60335-2-58:2017-Household and similar electrical appliances-Safety-Part 2-58: Particular requirements for commercial electric dishwashing machines, IEC 60669-2-4:2004-Switches for household and similar fixed electrical installations-Part 2-4: Particular requirements-Isolating switches, IEC 60034-29:2008-Rotating electrical machines-Part 29: Equivalent loading and superposition techniques-Indirect testing to determine temperature rise, IEC 60169-1-3:1988/AMD1:1996-Amendment 1-Radio-frequency connectors-Part 1: General requirements and measuring methods-Section Three: Electrical tests and measuring procedures: Screening effectiveness. Have a look at this IEC 61212-3-3:2006-Insulating materials-Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Part 3: Specifications for individual materials-Sheet 3: Round laminated moulded rods for all the recommendations.



IEC 60335-2-50:2002+AMD1:2007 CSV-Household and similar electrical appliances-Safety-Part 2-50: Particular requirements for commercial electric bains-marie, IEC 61991:2019-Railway applications-Rolling stock-Protective provisions against electrical hazards, IEC 60376:2018-Specification of technical grade sulphur hexafluoride (SF₆) and complementary gases to be used in its mixtures for use in electrical equipment, IEC 60884-2-6:1997-Plugs and socket-outlets for household and similar purposes-Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations, IEC 60335-2-78:2002/AMD1:2008-Amendment 1-Household and similar electrical appliances-Safety-Part 2-78: Particular requirements for outdoor barbecues, IEC 60107-5:1992/AMD1:1999-Amendment 1-Recommended methods of measurement on receivers for television broadcast transmissions-Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system, IEC 60364-4-44:2007-Low-voltage electrical installations-Part 4-44: Protection for safety-Protection against voltage disturbances and electromagnetic disturbances, IEC 60335-2-31:2012/AMD2:2018-Amendment 1-Household and similar electrical appliances-Safety-Part 2-31: Particular requirements for range hoods and other cooking fume extractors, IEC 60851-5:2008+AMD1:2011 CSV-Winding wires-Test methods-Part 5: Electrical properties, IEC 61991:2019-Railway applications-Rolling stock-Protective provisions against electrical hazards. Check out this IEC 61114-1:1999-Receiving antennas for satellite broadcast transmissions in the 11/12 GHz band-Part 1: Electrical measurements for the best information.



IEC 60335-2-5:2012/AMD1:2018-Amendment 1-Household and similar electrical appliances-Safety-Part 2-5: Particular requirements for dishwashers, IEC 60335-2-42:2002/AMD2:2017-Amendment 2-Household and similar electrical appliances-Safety-Part 2-42: Particular requirements for commercial electric forced convection ovens, IEC 61234-2:1997-Electrical insulating materials-Methods of test for the hydrolytic stability-Part 2: Moulded thermosets, IEC 62125:2019-Environmental considerations specific to insulated electrical power and control cables, IEC 61508-2:2010-Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508), IEC 61557-14:2013-Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c-Equipment for testing, IEC 60092-376:2017-Electrical installations in ships-Part 376: Cables for control and instrumentation circuits 150/250 V (300 V), IEC 62258-5:2006-Semiconductor die products-Part 5: Requirements for information concerning electrical simulation, IEC TS 62607-4-1:2015-Nanomanufacturing-Key control characteristics-Part 4-1: Cathode nanomaterials for nano-enabled electrical energy storage-Electrochemical characterisation, IEC 60601-1-3:2008/AMD1:2013-Amendment 1-Medical electrical equipment-Part 1-3: General requirements for basic safety and essential performance-Collateral Standard: Radiation protection in diagnostic X-ray equipment.